Why overclock motherboard

If you have an automated overclocking featured motherboard, take note; the system is NOT perfect. Usually, the automated overclocks are a bit conventional, which assures a higher level of stability, at the cost of not fully utilizing the potential of your chip. To go contiguous with your overclock-able CPU, you need a motherboard that supports overclocking.

Things are a bit easier on the AMD side in that most motherboards support overclocking of some sort. However, take into account that, overclocking increases the amount of power flowing through the motherboard to the CPU. You can damage your motherboard if you pair a power-hungry CPU with a low-cost motherboard, and then proceed to overclock it.

It will not harm your CPU or motherboard if overclocking is for the short term or you have a good cooling system that can take care of extra heat produced due to overclocking. Also, thermal garroting will occur if the temps surpass the safe range of operation of the CPU to keep the temps in check. To make the overclocking process more secure, make sure you properly remove the heat from CPU.

Heat sinks work well. Try to buy in an additional heat sink or a more powerful CPU fan to help remove the heat faster. Water cooling works better than air cooling. If you prefer air cooling, the Noctua NH-D15 is well-known for its great cooling performance.

The most important thing to consider is if your CPU and Motherboard even support overclocking. AMD has somewhat different rules, with many more of their CPUs being unlocked for overclockers to tinker with. So, if you plan to overclock your motherboard for a better CPU experience you must inspect that if your motherboard supports overclocking.

This means that, if you go with the smaller Micro-ATX and the even-smaller Mini-ITX, expect to give up on a number of features, including overclocking capabilities. Top 11 Professional Female Gamers, Ranked. How Much Do Streamers Make? Build a PC. Know How. How to Use Discord Overlay Features?

Pro Tips and More. Buying Guides. To display trending posts, please ensure the Jetpack plugin is installed and that the Stats module of Jetpack is active. Refer to the theme documentation for help. Photo by Morten Pradsgaard on Unsplash. Most CPU coolers come with thermal paste pre-applied, but the quality can be dubious depending on what brand the cooler is. Overclocking is great, but it does come with a few risks.

Heat is the main concern of CPUs, and too much heat can lead to a shorter lifespan for the chip. Not many people nowadays plan on having their computer last for 10 years and up, but it could be something to be worried about if you do want to hold onto the computer for awhile. Heat will only outright kill a CPU when it exceeds around degrees Celsius, though your CPU should automatically shut off at that point.

The other main risk is voltage. As previously mentioned, in order to achieve higher overclocks you also need to increase the voltage provided to the CPU.

Heat is one byproduct of this which is a problem, but the voltage itself could also be a problem. Too high voltage on your CPU can actually fry the chip, killing it. For absolute safety, many people recommend not going above 1. However, most motherboards will allow you to set anything up to 1.

My personal PC runs at 1. I am able to hold a stable 5ghz overclock at 1. However, not everyone is going to achieve results like this.