When distilled water is exposed to the air over time, it essentially becomes deionized water. Deionization, on the other hand, can be performed relatively quickly — especially if a mixed bed resin is used, so the water only needs to pass through one time.
Many deionized water systems use two mixed bed cartridges or tanks, helping to ensure that all ions have been removed, but it's still a relatively fast process when compared to distillation.
In addition, deionization is a chemical process, so energy is only typically needed to monitor the process and move the water through the system. If the DI resin is regenerated on site, this can add both time and expense to the process. You can easily cut costs up to ten times, if you use reverse osmosis ahead of DI. Even when adding in the cost of RO membranes and filters, the total cost per gallon rarely exceeds 5 cents a gallon.
When it comes to distilled water vs. In each case, however, the purity of the water before it goes through the water treatment makes a difference. The deionization process, for example, only removes ions — charged non-organic particles — from the water.
The water should be filtered first to remove organic material, and additional filtering with a reverse osmosis RO system will remove a significant number of additional contaminants. This leaves only a small amount of ionized minerals for the DI system to remove.
Water distillation, on the other hand, can remove more impurities than just ions. This process removes nearly all minerals, many chemicals, and most bacteria. That doesn't mean that it removes everything, however, especially if the water contains volatile organics and certain other contaminants.
These impurities will evaporate and stay in the distilled water. As with deionized water, pre-treatment filtering is an important step.
Since both treatment methods produce high purity water, choosing between deionized water vs. However, if any of the four primary factors cause your resin to foul prematurely, it could lead to a deterioration in your deionized water quality.
DI resin is the small bead-like substance that makes the entire water deionization process tick. It catalyzes the ion exchange that rids the water of every non-essential charged ion, creating highly purified water applicable for medical, bio or laboratory use. To fully understand how this could happen, you must first know how resin works.
Then, as water passes through the resin beads, all the other ions magnesium, sulfates, etc. Over time the resin beads can become fouled or damaged. If this happens, they lose their ability to hold hydrogen and hydroxyl ions, hindering the ion exchange process. Higher than average amounts of chlorine or chloramines from the incoming treated water can break down DI resin. If the resin is not regenerated correctly after picking up any of these contaminants, resin can become fouled.
If the resin becomes fouled, it greatly reduces the capacity of the resin, ultimately driving up the deionization costs to the end user. Choosing a set of deionizers that meet your facilities capacity requirements helps ensure longer lasting resin. The Low Flying library External search of the entire site Last seen: 3 years 2 months ago.
Last seen: 3 days 8 hours ago. Will take your advice. John Vine. Last seen: 8 hours 8 min ago. I agree with JK. Personally, I top up with distilled water obtained from my de-humidifier.
0コメント